8
www.raider.bg
- Never use the machine in the vicinity of combustible materials, liquids or gases.
- Wear safety goggles, a visor, a breathing mask, an apron and long tight sleeves.
- Keep children away. Do not allow other persons, particularly children, to touch the tool. Keep them
out of your work area.
- Always leave the safety devices in position and make sure that they are in good working order.
- Check at regular intervals that all screws and nuts are fastened securely enough, as they may work
loose as the result of vibrations.
- Make sure that the power cable is a safe distance from the working area.
- Do not use the router table with high-performance electric tools that are not suitable for the accessory
device.
- Do not try to machine work pieces which are obviously too big for the router table.
- Never leave an electric tool unattended when it is running. Always switch off your electric tool before
leaving it.
- Always pull out the power plug when not in use, before carrying out any maintenance work and
before changing the tool.
- Before using, make sure that the router is securely fastened in its holder in accordance with the
instructions.
- Do not overload your tool; allow the router to work without applying any pressure.
- Check to see if all parts are mounted. In this connection, please read the instructions and particularly
the safety information. Never use the machine if it is not fully assembled.
- Use the accessory parts and electric tools for their intended purpose only.
- Check the accessory parts to make sure that they are not damaged. Also make sure that moving
parts, clamping devices and safety guards are working correctly.
- Be alert at all times. Concentrate on what you are doing. Use common sense when working. Never
use the electric tool when you are distracted.
- Keep your electric tools in a safe place. When equipment is not being used it should be kept in a dry,
closed place out of children’s reach.
-
Wear suitable work clothes. Do not wear loose clothing or jewelry as they may get caught
in moving parts. Non-slip shoes are recommended. Wear a hair net if you have long hair.
- Always remove keys and wrenches after use. Before switching on, make sure that all keys and
wrenches have been removed from the tool.
- Before you put the router into operation, check that the routing cutter is properly seated.
- The router table may be used only for routing work on flat wood and flat wood-based materials.
- Provide an additional support for longer work pieces.
- Keep your hands away from the routing cutter. Use a push stick if necessary.
- Use the router table only when a dust extraction device is connected.
- Always guide the work piece against the running direction of the routing device.
- Never reach under the router table when the machine is running.
- Never cut over metal parts, screws, nails etc.
- To avoid damage to the router, make sure there are no foreign objects attached to the work piece.
Please refer to the booklet included in delivery for further safety instructions.
3.Layout (Fig. 1/2/3)
1.Longitudinal stop
2.Table width extension
3.Feet
4.Table top
5.Work piece guides
6. ON/OFF switch
7. Angle stop
8.T ransparent router cover
9. Connection for dust extractor
10. Table insert
11. Installation material for feet and table width extension
12. Installation material for router
Summary of Contents for RD-RT01
Page 2: ...2 www raider bg ...
Page 46: ...46 www raider bg ...
Page 48: ...48 www raider bg ...
Page 59: ...59 ...
