5
Original Instruction Manual
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric and
pneumatic tools - RAIDER. When properly installed and operating, RAIDER are safe and reliable
machines and work with them will deliver a real pleasure. For your convenience has been built and
excellent service network of 32 service station across the country.
Before using this machine, please carefully acquainted with these “instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and accidents,
it is important that these instructions will remain available for future reference to all who will use the
machine. If you sell it to a new owner “Instructions for Use” must be submitted along with it to enable
new users to become familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of
the trademark RAIDER.
Adress: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel 02 934 33 33, 934 10 10, www.
raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope
of certification: Trade, import, export and servicing of hobby and professional electrical, mechanical
and pneumatic tools and general hardware. The certificate was issued by Moody International
Certification Ltd, England.
TECHNICAL DATA
Model
unit
RD-TC31
Board length
mm
800
SAVE THIS MANUAL
You will need this manual for the safety warnings and cautions, assembly instructions,
operating procedures, maintenance procedures, trouble shooting, parts list, and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep both this manual and your invoice in a safe, dry place for future reference.
NOTICE
The Warnings, Cautions, and Instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be supplied
by the operator.
SAFETY WARNING & CAUTIONS
WARNING: When using shop equipment, basic safety precautions should always be followed to
reduce the risk of personal injury and hazards.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. OBSERVE WORK AREA CONDITIONS. Do not use tools in damp, wet, or poorly lit locations.
Do not expose to rain. Keep work area well lit. Do not use electrically powered equipment in the
presence of flammable gases or liquids.
3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them
handle machines, tools, or equipment.
4. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
EN
Summary of Contents for RD-TC31
Page 28: ...28 www raider bg ...
