8
Raise the vehicle with the jack and remove the supports. Very slowly and carefully turn the
valve (5) in the direction of counterclockwise. Vehicle will rush into your gravity. (In model RD-
TJ05-valve (5) is controlled by turning the lever (1) around its axis without having to remove
the lever).
5. Maintenance.
5.1. Topping up the hydraulic oil.
Place the jack on a horizontal basis. Remove the black hood covering the top jack (does not
apply to model RD-TJ05). You’ll see at the top of the power cylinder, rubber stopper for filling
the hydraulic oil. If the oil level is lower than 12 mm from the edge of the hole, then you must
make up hydraulic oil. Recommended hydraulic oil with viscosity class 10 SAE. After topping
up of oil obezvazdushete. (See also item 3.1.).
Be careful during the topping up or changing the oil, it does not fall to dust or other
contaminants.
5.2. Lubricated to prevent corrosion.
Piston rod of the power cylinder should be cleaned every three months with a clean cotton
cloth soaked in oil.
5.3. In the storage and prolonged non jack he must descend into extreme down position.
The first four digits of the serial number on the label of the jack means year of manufacture.
6. Environmental protection.
Hydraulic oil is a liquid that pollute the environment. Operations associated with the
valley and oil change should take measures against the accidental spillage of oil. Do not
dispose of disused hydraulic jacks household waste! In view of environmental protection
in the transmission of secondary raw materials, hydraulic oil to bleed into the office and for
processing in accordance with the rules. Prohibited to discharge of hydraulic oil into drains or
open water sources.
