9
Spindle taper
-
B16
Spindle travel
mm
60
Height:
mm
820
Table size:
mm
200 x200
Base size
mm
355х235
Column diameter
mm
60
Distance from spindle axis to surface of column
mm
126
Distance from spindle end to surface of table
mm
400
Distance from spindle axis to surface of base
mm
515
Protection class
-
I
Noise emissions
dB(A)
LPA=66 dB(A)
; LWA = 79
dB(A); K=3
dB(A);
WARNING
Read this manual carefully before using the machine, for your own safety.
SAFETY INSTRUCTIONS
When using the machine, always observe the enclosed safety instructions as well as the
additional safety instructions
The following symbols are used throughout this manual
Denotes risk of personal injury or damage to the tool
Caution! Read the instruction manual and follow the warning and safety instructions!
SAFETY INSTRUCTIONS
GENERAL
•
Read and save this instruction manual
•
Only use this tool for dry grinding/cutting
•
Only use the flanges which are supplied with this tool
•
This tool should not be used by people under the age of 16 years
ACCESSORIES
•
Use the original „Raider” accessories which can be obtained from your “Raider” dealer
•
For mounting/using non-“Raider” accessories observe the instructions of the manufacturer
concerned
•
Use only accessories with an allowable speed matching at least the highest no-load speed
of the tool
•
Do not use damaged, deformed or vibrating grinding/cutting discs
•
Protect accessories from bench, shock and grease
BEFORE USE
•
Before using the tool for the first time, it is recommended to receive practical information
•
Do not work with materials containing asbestos
•
Be careful of hidden electrical wires or gas- and water pipes; check the work area, for
instance with a metal detector
•
Be careful when cutting groves, especially in supporting walls (slots in supporting
walls are subject to countryspecific regulations; these regulations are to be observed under all
Summary of Contents for RDP-BD05
Page 66: ...66 www raider bg Exploded Drawing of Bench Drill RDP BD05 ...
Page 84: ...84 www raider bg ...
Page 87: ...87 ...
Page 89: ...89 ...