12
www.raider.bg
1. General instructions for safe operation.
Read all instructions carefully. Failure to follow the instructions below may result in electric shock,
fire and / or serious injury. Keep these instructions in a safe place.
1.1. Safety at work.
1.1.1. Keep your workplace clean and well lit. Crash and inadequate lighting can contribute to the
occurrence of an accident at work.
1.1.2. Do not operate the cordless drill in environments with an increased risk of explosion, near
flammable liquids, gases or dust.
During work, the spark plug may cause sparks that may ignite dust or vapors.
1.1.3. Keep children and side faces at a safe distance while working with the cordless drill.
If your attention is diverted, you may lose control of the cordless drill.
1.2. Electricity safety.
1.2.1. The charger plug must be suitable for the contact used. Under no circumstances will the design
of the plug be changed. When working with torn electrical appliances, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric shock.
1.2.2. Protect your cordless drill from rain and moisture.
The penetration of water into the cordless drill increases the risk of electric shock.
1.3. Safe way of working.
1.3.1. Stay focused, keep a close eye on your actions and act cautiously and reasonably. Do not use
the cordless drill when you are tired or under the influence of drugs, alcohol, or drug.
A moment of distraction when using the cordless drill can result in severe injuries.
1.3.2. Work with protective clothing and always with safety glasses.
Wearing personal protective equipment, such as a breathing mask, strong, tightly closed shoes with
a stable grapple, protective helmet and silencers, reduces the risk of an accident at work.
1.3.3. Avoid the risk of battery charging being inadvertently switched on. If, when carrying the
cordless drill, hold your finger on the breaker, there is a risk of an accident at work.
1.3.4. Avoid the unnatural positions of the body. Work in a stable position of the body and at any
moment maintain balance. This way you can control the battery drilling better and safer if an
unexpected situation arises.
1.3.5. Work with appropriate clothing. Do not work with wide clothing or jewelery. Keep your hair,
clothes, and gloves at a safe distance from the rotating units of the cordless drill. Wide clothes,
ornaments, long hair can be caught and dragged by the chuck.
1.4. Careful attitude towards the cordless drill.
1.4.1. Do not overload the cordless drill. Use the cordless drill only for its intended purpose. You will
work better and safer when using the appropriate cordless drill in the load range specified by the
manufacturer.
1.4.2. Keep the cordless drill in places where it can not be
Summary of Contents for RDP-CDL21
Page 90: ...90 www raider bg EXPLODED VIEW ...
Page 91: ...91 SPARE PARTS LIST ...
Page 108: ...108 www raider bg ...
Page 111: ...111 ...
