10
www.raider.bg
1.
General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock,
fire and / or severe injuries. Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the
occurrence of an accident.
1.1.2. Do not operate in an environment where the random orbital sander with an increased risk of
an explosion in the vicinity of flammable liquids, gases or powders.
During operation of the random orbital sander can be separated sparks that can ignite powders or
fumes.
1.1.3. Keep children and bystanders at a safe distance while working with the random orbital sander.
If your attention is diverted, you may lose control over the random orbital sander.
1.2. Safety when working with electricity.
1.2.1. Plug of the random orbital sander must be suitable for contact. In no case is allowed to
modify the structure of the plug. When working with electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric shock.
1.2.2. Avoid touching your body to earthed bodies, e.g. pipes, heaters, stoves and refrigerators.
When your body is grounded, risk of electric shock is greater.
Protect your striking drill from rain and moisture.
Penetration of water into the random orbital sander increases the risk of electric shock.
1.2.3. Do not use a power cord for the purposes for which it is not provided, e.g. to bear the random
orbital sander for cable or removing the plug from the outlet. Protect cords from heat, oil and contact
with sharp edges or points of mobile machines.
Damaged or twisted cables increase the risk of electric shock.
1.2.4. When you work with the random orbital sander outside, switch the machine only in installations
equipped with electric switch “Fi” RCD (Residual Current Device). RCD must be no more than 30 mA.
Use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the
risk of electric shock.
1.2.5. If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
1.3. Safe way of working.
1.3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use
the random orbital sander, when you are tired or under the influence of drugs, alcohol or narcotic
drugs.
A moment of distraction at work random orbital sander may have the effect of extremely serious
injuries.
1.3.2. Work with protective work clothing and always with safety glasses.
Wearing suitable for random orbital sander and the activities of personal protective equipment,
such as respiratory masks, healthy, tightly closed shoes grapple with a stable, protective helmet and
silencers (hearing protectors), reduces the risk of accident.
1.3.3. Avoid the danger of incorporating the random orbital sander inadvertently. Before you turn
the plug into the power supply network, make sure the trigger switch is in position “off”. If, when you
carry the random orbital sander, keep your finger on the trigger switch, or if you submit a voltage of the
random orbital sander, where it is included, there is the risk of accident.
1.3.4. Before you turn on the random orbital sander, make sure that you have removed all of her
utilities and wrenches.
Utilities, forgotten rotating unit can cause injuries.
1.3.5. Avoid unnatural positions of the body. Work in a stable position of the body at any time
and keep the balance. So you can control the random orbital sander better and safer if unexpected
situations arise.
1.3.6. Work with appropriate clothing. Do not operate with loose clothing or ornaments. Keep your
hair, clothes and gloves at a safe distance from rotating units of the random orbital sander. Robes,
attire, long hair can be caught and carried away by disc.
1.3.7. If possible use an external aspiration system, make sure it is switched on and functioning
Summary of Contents for RDP-RSA04
