7
Original instructions’ manual
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric and
pneumatic tools - RAIDER. When properly installed and operating, RAIDER are safe and reliable
machines and work with them will deliver a real pleasure. For your convenience has been built and
excellent service network of 40 service stations across the country.
Before using this machine, please carefully acquainted with these “instructions’ manual”.
In the interest of your safety and to ensure proper use and read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and accidents,
it is important that these instructions will remain available for future reference to all who will use
the machine. If you sell it to a new owner “Instructions’ manual” must be submitted along with it to
enable new users to become familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of
the trademark RAIDER.
Address: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel +359 700 44 155, www.raider.
bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope
of certification: Trade, import, export and servicing of hobby and professional electrical, mechanical
and pneumatic tools and general hardware. The certificate was issued by Moody International
Certification Ltd, England.
TECHNICAL SPECIFICATIONS
Parameter
Units of
measurement
Value
Model
-
RDP-SA23
Input voltage
V
230
Frequency
Hz
50
Rated Power
W
320
Variable Speed
min
-1
6000 ÷ 12000
Borad size
mm
115x230
Abrasive paper size
mm
115x280
Protection Class
-
II
General description of the machine
Sander is powered by a collector of single-phase motor. Thanks to the use of adequate insulation
is not possible for metal parts that could be touched and yet could accidentally be under tension.
Grinder does not require protective grounding (insulation class II).
Sander is designed for surface grinding of the final woodwork, polishing wooden surfaces
coated with varnish, polishing lacquered metal surfaces, removing rust or traces of polish before
re-polishing, finishing of metal surfaces, etc.
The areas of use are making repairs, carpentry and other work-related self-amateur activity.
Description of indications of machine elements:
1. Switch (on / off).
2. Hold button trigger button included in the situation (for convenience in a continuous operation).
3. Prahootvezhdane nozzle exit.
4. Brackets for attaching the grinding sheet.
EN
Summary of Contents for RDP-SA22
Page 2: ...2 www raider bg 2 1 3 4 ...
Page 41: ...41 ...
Page 54: ...54 www raider bg ...
Page 57: ...57 ...
