12
www.raider.bg
1.5.1. Do not use any accessories that are not recommended by the manufacturer specifically for
this power tool. The fact that you can attach a particular tool or tool to the machine does not guarantee safe operation.
1.5.2. Handle personal protective equipment. Depending on the application, work with a full face mask, eye protection
or safety glasses. If necessary, work with a breathing mask, silencers, footwear, or a special apron to protect you from small
particles that are scuffed. Your eyes must be protected from particles flying in the work area. The dust mask or breathing
mask filters the dust that appears to work. If you are exposed to high noise for a long time, this can lead to hearing loss.
1.5.3. If you perform activities in which the tool may become exposed to live conductors or the power cord, hold the
machine only for electrically-operated handles. When the tool comes into contact with live wires, it is transmitted to the metal
parts of the punch and this can lead to electric shock.
1.5.4. Never leave the punch before the tool stops completely rotating. The rotating tool may touch an object, resulting
in loss of control over the punch.
1.5.5. Regularly clean the ventilation holes of your impact drilling machine.
1.5.6. Do not use the punch near flammable materials. Flying sparks may cause ignition of such materials.
1.5.7. Never place your hands near rotating work tools.
1.5.8. Use suitable utensils to find any hidden under-pipe pipelines or contact your local supply company. Contact with
live wires may cause fire and electric shock. Damage to a gas pipeline may lead to an explosion. Damage to the water supply
leads to heavy material damage and may cause electric shock.
1.5.9. During operation, hold the punch firmly with both hands and secure the body firmly. The two handhelds are safer.
1.5.10. Provide the machined detail.
A detail gripped with appropriate fittings or brackets is locked more firmly and securely than if you hold it by hand.
1.5.11. Keep your workplace clean.
Mixtures of different materials are particularly dangerous. Fine castings of light metals can self-ignite or explode.
1.5.12. If the punch is stored at low temperatures or after a long period of time that is not in use, you must turn it on to
work for a few minutes without a load to allow the items to crush.
Do not use a three-pin chuck when the machine is set to work in a punch mode. This chuck is only for drilling without
impact in wood or steel.
Failure to follow the instructions may result in electric shock, fire and / or serious injuries.
2. Functional description and purpose of the punch.
Cordless drilling machines are widely used for drilling holes in concrete, masonry and stone materials, as well as drilling
without impact.
In working mode without impact, holes in wood, wood-like materials, metal, ceramics, and synthetic materials can be
drilled. Areas of use are the construction of repairs and other works related to the independent amateur activity. It is not
allowed to use the machine for activities other than its intended purpose.
3. Information on emitted noise and vibrations.
The values are measured according to EN 60745. The noise level A is usually: sound pressure level LpA = 86.4 dB (A);
sound power LwA = 97.4 dB (A). Uncertainty K = 3 dB.
Work with silencers! The resulting vibration value (the vector sum in all three directions) was determined according to
EN 60745.
Drilling
Vibration emitted value ah = 10.07 m / s2, uncertainty K = 1.5 m / s2.
The vibration value specified in this manual is measured using the method specified in EN 60745 and can be used to
compare different power tools. The vibration level iswill vary depending on the specific activity being performed, and in some
cases may exceed the value specified in this guide.
If the power tool
is used for a long time in this mode, the load caused by vibrations could be underestimated. For an accurate assessment
of the vibration load in a given operating cycle, the intervals in which the power tool is off or idling must also be taken into
account. This can significantly reduce the reported vibration load over the entire work cycle.
4. Preparing for work. Installation of auxiliary accessories and tools.
4.1.
The rechargeable machine is supplied without a battery and a charger. Use only battery
and charger from the R20 System series
4.2. Putting a drill into the chuck.
Summary of Contents for RDP-SBRH20
Page 82: ...82 www raider bg ...
Page 85: ...85 ...
