16
www.raider.bg
Before using, always visually inspect to ensure blades, blade bolts, and cutter assembly are not worn or
damaged.
Replace worn or damaged blades and bolts in sets to preserve balance.
The blade on the product is very sharp. Use extreme caution and wear heavy duty gloves when fitting,
replacing, cleaning or checking bolt security.
Return to an authorised service centre to replace damaged or unreadable labels.
Check all nuts, bolts, and screws at frequent intervals for proper tightness to be sure the equipment is
in safe working condition. Check the grass box frequently for wear, holes or deterioration.
Replace worn or damaged parts before operating the product.
The mower must be started with the user behind the handlebars in the operator safety zone. Never start
the product if:
All four wheels are not on the ground
The grass discharge chute is exposed without being protected by either the mulching plug and grass
discharge chute cover or the grass box and grass discharge chute cover.
Hands and feet of all persons are not clear of the cutting enclosure.
Never operate the product if the on/off switch on the handlebar does not properly start and stop the
product.
Never attempt to lock the on/off switches in the On position, this is extremely dangerous.
Do not force the product. It will do the job better and safer at the speed for which it was designed.
Stop the blade when crossing gravel surfaces.
Do not pull the product backward unless absolutely necessary. If you must back the product away from a
wall or obstruction, first look down and behind to avoid tripping or pulling the product over your feet.
Ŷ Stop the motor and allow the blade to stop if the product has to be tilted for transportation when
crossing surfaces other than grass, and when transporting the product to and from the area to be
mowed.
Ŷ Never use the product with defective guards or shields, or without safety devices, for example,
deflectors and/ or grass boxes, in place.
Ŷ Do not tilt the product when switching on the motor or whilst the motor is running. This exposes the
blade and increases the probability of objects being thrown.
Ŷ Switch on the motor carefully according to instructions and keep hands and feet away from cutting
area. Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all
times. Do not start the machine when standing in front of the discharge opening.
Ŷ Never pick up or carry the product while it is running.
Stop the mower motor and remove isolator key and/ or disconnect from the power supply, make sure
that all moving parts have come to a complete stop for the below cases:
- whenever you leave the product unattended (including disposal of grass clippings).
- before cleaning a blockage or unclogging discharge chute
- before checking, cleaning or working on the product
- after striking a foreign object; inspect the product for damage and make repairs as necessary
before restarting and operating the product.
- before removing the grass box or opening the grass discharge chute cover.
If the product starts to vibrate abnormally (check immediately)
▪
inspect for damage, particularly the blades
Summary of Contents for RDP-SLM20
Page 45: ...45 EXPLODED VIEW OF RDP SLM20 ...
Page 61: ...61 ...