20
www.raider.bg
Press and hold in the safety Lock-Off Button located on the switch box.
Hold in the Safety Lock-Off Button and pull the Switch Lever upwards towards the handle and hold in this
position.
The motor will now start.
Release the Safety Lock-off Button.
To stop the mower simply release the Switch Lever and the mower will stop.
Warning: The blades will continue to rotate for some
time after the mower has been switched off. Make sure that the blades have come to complete stop and that
you have removed battery packs from lawn mower before carrying out any maintenance.
Height Adjustment
For height adjustment proceeds as follows:
Warning: Stop, release switch lever and wait until
the motor stops. The blades continues to rotate for a few second after the machine is switch off, a rotating
blade can cause injury. For the first cut of the season, a high cutting adjustment should b selected.
This machine can be set to tree height of cut. I = 20 mm II = 35 mm III = 50 mm.
Pull Height adjustment lever to the broadside. Push the adjustment lever to the front or back.combine them,
then you turn on the machine rear cover, align the
When the adjustment lever is in the front, the height is toppest, when in the back, the height is the lowest.
Note: For long grass, start mowing with the highest setting and then gradually reduce the height of cut.
Warning: When mowing, do not allow the motor to runs in heavy conditions.
Summary of Contents for RDP-SLM20
Page 45: ...45 EXPLODED VIEW OF RDP SLM20 ...
Page 61: ...61 ...
