3.4 An introduction to other functions
3.4.1 LCD monitor operation guide
※
GR3630-2S-SB2+
1. After power ON and before entering standby screen, click on ENTER key, you will enter into product
function setup options (product default password is: 0000)
2. Upon booting, the standard standby screen will display the hard disk operation status.
3. It will display product model/RAID level/firmware edition.
4. It will display system temperature.
5. It will display fan rotation.
6. There are two functional setup options, one of them is RAID level setting, and the other is login
password setting.
7. The factory default setting of RAID level is RAID-1, therefore, upon entering, you will be asked
whether or not to change RAID-0. A change of RAID level would cause the original hard disk data to
get lost, please pay special attention to it.
GR3630-2S-SB2+
Booting ...
PASSWORD
0000
GR3630-2S-SB2+
RAID - 1 V090707.1
SYSTEM TEMP
35 C
4600 RPM
Pri HDD : OK
Sec HDD : OK
SYSTEM FAN
CHANGE RAID MODE
YES NO
SETUP PASSWORD
Down
Down
Down
Down
Enter
Enter
Down
YES NO
Up
1
2
3
4
5
6
GR3630-2S-SB2
Booting ...
PASSWORD
0000
GR3630-2S-SB2
RAID - 1 V090707.1
SYSTEM TEMP
35 C
4600 RPM
Pri HDD : OK
Sec HDD : OK
SYSTEM FAN
CHANGE RAID MODE
YES NO
SETUP PASSWORD
Down
Down
Down
Down
Enter
Enter
Down
YES NO
Up
RAID - 0 MODE
YES NO
DATA WILL LOSE
YES NO
Raid Mode Changed
Pls Reboot Sys
PASSWORD
PASSWORD : 0000
YES NO
SETUP PASSWORD
OK
0000
Enter
Enter
Enter
Enter
Enter
Enter
6
8
7
Installation of GR3630
17