background image

1

3

4

2

Hard drive status Indicator
Removable drive tray
Button for Tray Clamp
LCM display

UP button

DOWN button
ENTER button
ESC button
Power indicator

Alarm indicator

USB3.0 interface connection
e-SATA interface connection
FireWire 800 (1394b) 
interface connection

Mute button

Power Switch
Power socket
Cooling fan
Anti-theft cord slot

GR5630-WSB3+ Quick Installation Guide

Package Contents and Product Views

Hardware Installation

Visual Status Indicator Definitions

GR5630-WSB3+

Item

Qty.

1
1
1
1
1
1
1
1

GR5630-WSB3+ (with removable drive tray enclosed)
Firewire 800 (1394b) Cable
e-SATA Cable
USB 3.0 Cable
AC Power Cable
Quick Installation Guide
Accessories Kit
CD(GUI)

Step 3 Press down the button for tray clamp to eject the removable drive tray latch and  

extract the removable drive tray.

Step 1 Open the package and take out the product making sure that all the enclosed 

contentsare not damaged or missing. Should you find damages or missing contents
, please contactyour supplier immediately.

Step 2 Place the system on a stable surface. Ensure that it is well ventilated without blockage 

tothe vent and kept away from areas near water and damage prone areas.

Step 5 When the hard drive installation has been completed, insert the hard drive tray into 

the system horizontally and secure the latch into place.

Step 6 Connect the AC power cable to the GR5630-WSB3+, and then plug the AC power to 

the wall socket. Boot-up the unit.

Step 7 Set the storage mode using the LCD and buttons on the front (please refer to section 

5 for front panel and LCD information).

Step 8 Connect the cable to the PC and the GR5630-WSB3+ port.

Step 9 After boot-up, your operating system will automatically detect the storage capacity 

of your hard drives. Please follow the operating system instructions to configure and 
format your drives. The formatted drives can be configured for the RAID setup.

Step 4 Mount your hard drives onto the removable drive tray and secure it with the screws 

included in the accessory kit to avoid any damage to the hard drive due to accidental 
movements.

States

Power on

Blue

Blue

Blue

Blue

Blue

Blue

Blue

Blue

Blue

Blue

Blue flash => Blue

--------

Red

Red

Blue

Blue flash

Blue flash

Blue

Blue

Source: Blue flash
Target: Blue and Purple 
light on alternatively

------

------

------

------

------

------

------

Red

Red

------

1 long when 

booting finished

------

------

4 short

------

------

------

4 short

4 short

------

No disk

Disk Fail

RAID Fail

Disk Idle

Format

Access

Fan Fail

Over Temp.

Rebuilding

buzzer

Power LED

Alarm LED

HDD LED

Front LED

Open the package and you should find the following :

Please make sure that the contents listed above are not damaged or missing. If you should 
finddamages or missing contents, please contact your supplier immediately.

Front view

Rear view

Enter

Esc

Drive position(1)

Drive position(2)

Drive position(3)

Drive position(4)

USB3.0

Alarm Mute

Thank you for choosing product from 

RAIDON Technology Inc.

 This i n fo rma ti o n i n th e ma n u a l 

h a s b e e n th o ro u g h l y ch e cke d b e fo re p u b l i ca ti o n , b u t ma y n o t co n fo rm to th e p ro d u ct 

a ctu a l l y d e l i ve re d w h i ch me a n a ctu a l p ro d u ct sp e ci fi ca ti o n s d e p e n d o n th e p ro d u ct 

sh i p p e d to yo u . An y u p d a te i n th e sp e ci fi ca ti o n s o r p ro d u ct-re l a te d i n fo rma ti o n sh a l l n o t 

b e su b j e ct to fu rth e r n o ti ce b u t fo r th e l a te st i n fo rma ti o n o n th e p ro d u ct, p l e a se vi si t th e 

w e b si te a s 

www.RAIDON.com.tw

 or contact us at 

supporting@raidon.com.tw

, and we wi l l g e t 

b a ck to yo u a s so o n a s p o ssi b l e .

C o p yri g h t © 

RAIDON TECHNOLOGY, INC.

 All rights reserved.

Description of Front Panel Operation

Enter: Enter to next level or Confirm
Esc: Back to next level or Cancel
Up / Down: Select Items

Users can set the RAID mode using the LCD and buttons on the front. The default is JBOD mode. Using

“Quick Setup” function, users can change the RAID mode to RAID 0 or RAID 5 quickly.

Please refer to LCD Information as below for other setting.

LCD Information

External 4BAY

HARDWARE 
RAID

Quick Setup

Delete All RAID

Identify Disk

Show Disk Info
Identify RAID
Create RAID
Delete RAID
RAID Info
Change RAID Pwd
Rebuilding Priority
Standby Timer
System Info
Changhe Password
Logout From Menu
Alarm Control

Voltage Monitor

< 3.3V/5V/12V >
< Temp. >
< Fan Speed / 

Fan Level >

Temp. Monitor

Fan Monitor

Hardware Monitor

Select Disk

< Disk Info >
Select RAID
RAID 0 / RAID 5
Select RAID

< Password > 

for RAID Setup

Highest/High/Medium/Low/Lowest
< 99999min >
Firmware Version
< Password > 

for System Info

< Y or N >
Mute the Buzzer

Disk 1
Disk 2
Disk 3
Disk 4

Check Disk LED
Check Disk LED
Check Disk LED
Check Disk LED

Create One RAID

RAID 0/ RAID 5

Select Disk

Disk Manager

RAID Manager

System Manager

Level 0

Level 1

Level 2

Level 3

Level 4

Reviews: