“Firmware Upgrade” allows for the upgrades to the firmware of corresponding device, also indicates the
existing version of firmware to the corresponding device.
Note : If installed storage device operates normally, we strongly recommend not upgrading the existing firmware.
3. E-Mail Notify
“E-Mail Notify” provides auto E-Mail notifications of HDD removal or failures to the designated E-Mail
addressee. (“E-Mail notify” can be disabled temporarily or permanently after configuration by selecting
“Don’t send Email for this event” from each error options.)
Note : This function activates only under operating states of RAID GUI.
4. About
“About” indicates the version of RAID Management, the RAID GUI software.
24
RAID GUI Instruction