SOHORAID GR4670-TB3 User Manual
12
9. Frequently Asked Questions
1. If the GR4670-TB3 is turned on, but the Thunderbolt™ cable is not connected, the fan and power status
lights will both be in stopped/hibernation mode. The fan and power status light will not come on until the
Thunderbolt™ cable is connected to the computer.
2. When the computer enters hibernation mode, the fan and power status lights will both be in stopped/
hibernation mode. The fan and power status light will not come on until the computer is awake.
3. If a hard disk already contains data from another RAID product or RAID mode has already been set,
we recommend reverting back to JBOD mode before the drive is used with the GR4670-TB3 again to
avoid problems accessing the hard drive.
4. If the DR8M-TB3 is installed on the Windows OS but can not be connected, refer to the following
steps:
B. GR4670-TB3: Let its TB A port connect to Host (PC/Workstation/Server), TB B port to a
monitor, and mDP port to the second monitor.
A. Open the Windows Taskbar.
B. right-click the Thunderbolt™ icon.
C. Select "Approve Attached Devices".
D. Select the port to which the device is connected.
E. Wait for the dialog box "Approve Thunderbolt™ ™ Devices" to appear.
F. Select "Always Connect"
G. Press "OK"
。
D
RAIDON tech., GR4670-TB3
A
C
B
E
G
F
Summary of Contents for SOHORAID GR4670-TB3
Page 1: ...SOHORAID User Manual GR4670 TB3 ...
Page 32: ...www raidon com tw ...
