Manual IB-1824ML-C31
Usage
•
Connect the IB-1824ML-C31 via the delivered cable to the correspon-
ding port of your host computer.
•
When the IB-1824ML-C31 has been plugged correctly the LED will
turn on white!
•
As soon as the write protection has been activated by switch, the LED
lights up red*
*Important! Changing of the write-protect mode will only be activated
when the device has been disconnected and then reconnected to the
host computer.
Application
•
The external SSD can be connected to or disconnected from the com-
puter without shutting down the computer.
•
Please await the end of read/write operations before disconnecting
the SSD to avoid data lost.
•
A new SSD must first be initialized, partitioned and formatted by the
operation system to be displayed by the system.
•
If the drive isn’t recognized instantly by the operating system please check:
- if the driver software is installed (USB)
- if the SSD is initialized, partitioned and formatted
Info
: Drives must be initialized and have active partitions to be immediately
recognized as volumes in the operating system. If this is not the case, initialize
the drives in the volume management of your operating system.
The full USB 3.1 (Gen2) transfer rate can only be achieved with a compatible
USB 3.1 (Gen2) host computer. Furthermore, the USB 3.1 drivers must be
installed by the operating system. If this is not the case, install the appropriate
drivers for your operating system (Windows
®
, macOS
®
).
