Operator’s Manual
© Copyright 2018 - Rail-Ability Limited
Page
44
of
71
Conversion
❑
Check cab windscreen and wipers.
❑
Check all electrical plugs are connected and hydraulic connections are coupled.
Check the following components and areas for damage, improperly installed, loose or missing parts and
unauthorised modifications:
❑
Electrical components, wiring, electrical cables and earth straps.
❑
Hydraulic power unit, tank, hoses, pipes, fittings, cylinders and manifolds.
❑
Batteries and connections.
❑
Fuel and hydraulic tanks.
❑
Turntable drive motor.
❑
Boom wear bushes.
❑
Proximity switches, alarms and horns.
❑
Nuts, bolts, pins and other fasteners.
❑
Lubrication points.
❑
Tow bar.
❑
Fire extinguisher.
❑
Rail wheel hubs, treads, flanges and rail sweepers.
❑
Ladders, steps and hand rails.
❑
Guards and covers.
Check the entire machine for:
❑
Cracks in welds or structural components.
❑
Dents or damage to machine.
❑
Excessive wear, rust, corrosion or oxidation.
Ensure that all structural and other critical components are present and all associated fasteners and
pins are in place and properly tightened.
❑
Following inspection, ensure that all compartment covers are in place and latched.
17.4 Completion
If any routine maintenance has been identified in these pre-operation actions, carry it out as specified
in the Routine Maintenance section of this manual.
If no routine maintenance is required, carry out the Function Tests detailed in this manual.
