manualshive.com logo in svg

Rail King RAILKING E-8 AA, Operator'S Manual

The Rail King RAILKING E-8 AA comes with a comprehensive Operator's manual equipped with all the necessary instructions to maximize your experience. Easily accessible for download, this manual is available for free at 88.208.23.73:8080. Get in-depth knowledge of your product's functionalities and unleash its potential with the help of this user-friendly manual.

Share
Download
background image

Railking E-8 AA Diesel Engine Proto-Sound®2.0

13

Traction Tire Replacement Instructions

Your locomotive is equipped with two neoprene rubber traction tires on each 
powered truck block.  While these tires are extremely durable, you may need to 
replace them at some point.

First, remove the truck sides from the truck block.  To do this, turn your engine 
upside down.  If  there are visible Phillips screw heads between the truck frame and 
truck block (see below), go to step A.  If  not, go to step B. 

A. Remove the two Phillips screws that attach each truck side to the truck block.

B. Remove the trucks  (see page 11) from the chassis and the truck sides from the 
trucks in order to slip the new tire over the grooved drive wheel.  Once the truck 
sides have been removed:

1. Make sure the old tire has been completely removed from the groove in the drive 
wheel, using a razor blade or small flathead screwdriver to pry away any remains.

2. Slip the new tire onto the wheel.  
You may find it useful to use two 
small flathead screwdrivers to 
stretch the tire over the wheel.  

3. If  you twist the tire while 
stretching it over the wheel, you 
will need to remove and reinstall 
the tire.  Otherwise your engine 
will wobble while operating.  

4. Make sure the tire is fully seated 
inside the groove.  Use a razor blade 
to trim away any excess tire that 
doesn’t seat itself inside the g roove 
properly.

5. Reassemble in reverse order.

One set of  replacement tires is packaged with the model.  Additional tires are 
available directly from the M.T.H. Parts Department  (Order online:  www.mth-
railking.com, e-mail: parts@mth-railking.com,Fax:  410-423-0009, Phone: 410-381-
2500, Mail: 7020 Columbia Gateway Drive, Columbia MD 21046-1532, ). 

 

Truckside Screws 
(Reference Picture Only- 
Actual Model May Look Different)

Truckside Screws

Summary of Contents for RAILKING E-8 AA






















Reviews:

No comments

Related manuals for RAILKING E-8 AA

Brands by name

Popular brands

Load more brands