manualshive.com logo in svg

Rail King RAILKING E-8 AA, Operator'S Manual

The Rail King RAILKING E-8 AA comes with a comprehensive Operator's manual equipped with all the necessary instructions to maximize your experience. Easily accessible for download, this manual is available for free at 88.208.23.73:8080. Get in-depth knowledge of your product's functionalities and unleash its potential with the help of this user-friendly manual.

Share
Download
background image

Railking E-8 AA Diesel Engine Proto-Sound®2.0

20

Additional Features Accessible With The DCS 

Remote Control  System

(Additional equipment required)

While conventional mode operation of a Proto-Sound 2.0 engine yields 
wonderfully realistic sound and several train control features, command mode 
operation allows the user to access a world of  command functions never before 
accessible to O Gauge railroaders.  With the addition of  the DCS Remote Control 
System (including a DCS remote handheld and Track Interface Unit) users gain 
many advanced features, including:

•DCS Proto-Speed Control - Establishes desired locomotive speed in 
scale miles per hour increments via a thumbwheel control and allows 
operator to set maximum speed and acceleration/deceleration rates

•ProtoSmoke® Variable Output Control - Controls how much smoke 
each engine outputs and matches smoke to locomotive speed

•Locomotive Lighting Control - Controls locomotive headlights, marker 
and interior lights, beacon lights, ditch lights, and MARS lights

•Emergency Stop-Single button push stops all Proto-Sound 2.0 trains but 
does not turn off  the power

•One Touch Global Mute/UnMute-Single button mutes or unmutes all 
DCS-controlled locomotives' user-defined actions, including sound, lights, 
and smoke

•Proto-Dispatch Operation-Public Address-like feature allows users to 
speak through locomotive speaker during operation

•Proto-Cast-Allows users to play audio recordings through locomotive 
speaker during operation

•Proto-Doppler Sound Effects Set Up-Users can configure locomotive 
for Doppler Operation, including setting distance points for Doppler 
start, repeat, and stop modes

•Independent Volume Control of Engine Sounds, Bell, Horn & Whistle 
for each Locomotive

•Control up to 50 different DCS-Equipped Locomotives at one time with 
multiple TIUs

•Proto-Effects™ Set Up-User can select individual Proto-Effects™ 
operations to be active or inactive, including cab chatter, train wreck 
sounds, coupler sounds, Direction Control Set Up-User can set initial 
individual start-up direction (start in  forward or reverse) for double-
heading operations

•Locomotive Consist Set-up-User can determine locomotive values for 
consist make-ups, allowing multiple locomotives belonging to a consist to 
operate together

Summary of Contents for RAILKING E-8 AA






















Reviews:

No comments

Related manuals for RAILKING E-8 AA

Brands by name

Popular brands

Load more brands