8
Diesel “Work Train“ Train Set Operating Manual
RAILKING
throttle is turned OFF and then ON again. At this point, the engine will
now function just like any other electronic or mechanical E-unit.
In addition to the DCRU® electronic reverse unit, your new train set
locomotive features an electronic horn that can be activated by
pressing the white Horn/Whistle button on your Z-750 transformer.
Any compatible transformer whistle or horn button will also activate the
horn in your new locomotive. Simply pressing the Horn/Whistle button
whenever the throttle is above the OFF setting should activate the horn.
If the horn doesn’t blow, increase the throttle setting and press the
button again. The horn will blow as long as the button is depressed.
Now, if you’ve lubricated the locomotive friction points as indicated
earlier, you’re almost ready to start running your train set.
Transformer Operation
The Z-750 provides the model railroad enthusiast with an easy to use,
safe power source for AC-powered trains and accessories. Set up is
quick and easy by following the setup diagram below.
Functions:
Bell: Press to activate a digital sound system bell
(not found on Amtrak
Diesel “Work Train“ Set model number 30-4018-0)
, press again to
deactivate.
Horn/Whistle: Press to activate.
Direction: Press to stop motion of train and press again to change
direction
-7 5 0
D I R E CT I ON
B E L L
H OR N
W H I S T L E
P OW E R
R
K
AIL
ING
B y M T H E lectr ic T r ains
®
T RANS FORMER CONT ROLLER
OFF
FU
LL
PO
W
ER
Figure 10: Z-750 Controls
