PIKUS 105/105DL – PIKUS 75/75DL
ENGLISH
4
Before leaving the production site, our machines undergo a series of tests to ensure quality, safety
and efficiency.
If you follow the instructions in this manual carefully, under normal operating conditions, your
machine will last a long time.
Before using the machine, read this manual carefully as thorough knowledge of the instructions
prevents accidents and malfunctions.
Use
PIKUS 105/105DL – 75/75DL saws are suitable for cutting and rounding off (Jolly 45°) single or double-fired
ceramic tiles, porcelain stoneware, marble, natural stone and Tuscan brick.
The maximum cutting thickness is inversely proportional to the hardness of the material to be cut. When
cutting, the forward speed is proportional to the hardness of the material to be cut.
Type of tool suggested
DIAMOND DISK
∅
EXT. 230/250 mm
∅
DISK HOLE 25,4 mm
GRAIN SUGGESTED
FOR
SMOOTH CROWN
D181
CERAMICS, SINGLE-FIRING, PORCELAIN STONE-
WARE
SMOOTH TURBO CROWN
D252
CERAMICS, SINGLE-FIRING, PORCELAIN STONE-
WARE
SECTORED
D301
MARBLE, BRICK, NATURAL STONE
Limitations
The PIKUS 105/105DL – 75/75DL saws are designed to be used only with the disks described above and
must be water-cooled.
Never use the machine with disks for wood-working machines.
Modifications that alter the original characteristics of the machine, the type of disk used, disk r.p.m. or the
safety devices can only be performed by the manufacturer, checking that the machine complies with the
safety standards. Therefore any modification or maintenance operation not included in this manual is
expressly forbidden.
If the necessary maintenance operations are not included in this manual, contact the manufacturer or the
dealer.
Technical data
PIKUS 105/105DL
PIKUS 75/75DL
WEIGHT kg
66
56
TANK CAPACITY
l
33
23
MAXIMUM DISK DIAMETER
mm
250
250
DISK HOLE
∅
mm
25,4 25,4
SPEED min
-1
2000
2000
MAX. CUTTING THICKNESS OF DISK
∅
230
mm 70
70
MAX. CUTTING THICKNESS OF DISK
∅
250
mm 80
80
USEFUL CUT
cm
105xU
NLIMITED
75xU
NLIMITED
JOLLY 45°
cm
105xU
NLIMITED
75xU
NLIMITED
TECHNICAL DATA FOR MOTORS
SINGLE-PHASE
230V 50Hz 1,1kW
8,5A 2800 min
-1
MOTOR CLASS F
SINGLE-PHASE
230V 60Hz 1,1kW
8,5A 3360 min
-1
MOTOR CLASS F
SINGLE-PHASE
115V 50Hz 1kW
17A 2800 min
-1
MOTOR CLASS F
SINGLE-PHASE
115V 60Hz 1kW
17A 3360 min
-1
MOTOR CLASS F
Summary of Contents for PIKUS 105
Page 1: ...GB...
Page 2: ......
Page 16: ...PIKUS 105 105DL PIKUS 75 75DL ENGLISH 16...
Page 19: ......
