Installation
ENG
ESP-Me Controller
14
Station Numbering
Fixed Station Numbering Description
The controller is configured with Fixed Station Num-
bering. Each bay is set up to accept a 6 station module
and reserve the station number for future use if a 6 sta-
tion module is NOT installed in Bays 2, 3 or 4.
Station numbers are pre-assigned as follows:
Bay 1
Bay 2
Bay 3
Bay 4
VT MV COM
VT MV COM
5 6 7
11 12 13
17 18 19
1 2 3 4
8 9 10
14 15 16
20 21 22
Example Of Recommended Installation For 19 Stations
Module Configuration
Example of installation with station numbering gaps:
• A total of 19 stations are installed.
• The Base Module is installed in Bay 1 and uses Sta-
tions 1 through 4.
• A 6-Station Expansion Module is installed in Bays 2
and 3 using Stations 5 through 16.
• A 3-Station module is installed in Bay 4 and uses
stations numbered 17 through 19.
Because a 3-Station module is installed in Bay 4, only
the first three station numbers assigned to that bay will
be used and the unused numbers will be “reserved” for
future use.
c
b
NOTE:
During programming, the controller will
skip any unused station numbers, creating a gap
in station numbering.
Summary of Contents for ESP-Me
Page 139: ...This page intentionally left blank...
