WS PRO LT weather station
9
At the computer…
12.
Connect the black (-xmt) wire to the (-xmt) port of the RAD modem furnished with the weather
station. Use a small screw driver to open the hole, insert the wire and then tighten with the screw driver
13.
Continue with the green (+xmt), red (+rcv) and black (-rcv) wires respectively
14.
Connect the RAD modem to a COM port on your computer (it might be necessary to use a 9 to 25 pin
adapter)
Installation Procedure
1.
Mount a mast/pole 1.25” OD and 8 to 10 feet (312 cm) high on cement base.
2.
Place your weather station assembly on top of the mast/pole with the base firmly seated on the top
edge of the mast/pole of (see Figure 6)
3.
Loosely tighten the U-bolt nuts so that the weather station is stable but can be rotated on the mast/pole
(Figure 7).
Figure 6 Installation
at Pole
Figure 7 U-Bolt Nuts
Summary of Contents for WS PRO LT
Page 1: ...WS PRO LT Weather Station Installation Manual ...
Page 2: ......
Page 13: ......
Page 14: ......