Your surface material can be anything from a non-slip broom finished
concrete to rubber surfacing. We recommend using a non-slip surface
material. Your surface material needs to be determined
before
setting the
Rain Deck housings. Determine the thickness of the surface material so
that when the Rain Deck housings are mortared into place, the top of the
housing will be flush with the top of the surface material.
When installing the surface material, take precautions to ensure no debris
enters the Rain Deck housings. Generally, taping off the opening on the
Rain Deck housing will be sufficient.
Ensure that the surface material does not interfere with the slope to the
drain. When installing the surface material, occasionally check for
proper slope to the drain.
The finished surface material should cover the entire pad and NOT leave
any gaps around the housings, drain(s) or other areas on the splash pad.
Your Splash Pad Product and Installation Resource
Surface Material
