Rain Master Irrigation Systems
Weather Center II User Manual
Page 29
4.0
Reading the ET Values
4.1
At the Evolution DX2 Controller
The ET values may be read from the display of the Evolution DX2
controller by following the steps listed below. Advance to the ET Sensor
screen through the following menu sequences:
F1 = Main Menu
F3 = Status
F2 = Measurements
F4 = ET
The ET Sensor screen displays seven consecutive days of ET readings,
from Sunday through Saturday.
SUN MON TUE WED THU FRI SAT
.07 .08 .11 .10 .14 .09 .11 ET-INCHES |
↑
|
Each day displays the ET reading in 1/100th of an inch (0.01”). One day
represents a 24-hour period beginning at midnight.
Using the Evolution Central Control system, the accumulated ET values
can be stored by the day and by the week for any period of time desired.
At midnight, the current ET value will be replaced with a zero (0) and a
new days ET value will start to accumulate.
Note:
Although the ET readings are continuously updated, the
latest readings will not appear on screen. To read the most
recent values, exit the ET screen using the up arrow then
return to the ET screen by pressing F4.
4.2
At the RME Eagle Controller
The RME EAGLE controller is capable of reading, processing and
storing the accumulated values received from a Rain Master
Weather Center. The Weather Center provides a single count for
Summary of Contents for Weather Center II
Page 1: ...Weather Center II User Manual Part 500009 Rev D...
Page 2: ...Weather Center II...
Page 3: ......
Page 7: ......
