R a i n b o w C o l o u r C h a n g e r s G m b H
An der Talle 26-28
D-33102 Paderborn
Tel: +49 5251 14092 28
Fax: +49 5251 14092 90
E-mail: info@rainbow-colour-changers.de
Homepage: www.rainbow-colour-changers.de
12
General functions
Key functions during powering up the scroller:
Key/Sequence
Action during the procedure of
power up
Display
(?- for individual value)
Display/Action
+*
Press and hold both keys while
powering up the scroller
$
))
Reset to factory parameters incl. information
„no gel string is loaded“
*
Hold while powering up the scroller
$
Locks the Scroller
*
Hold while powering up the scroller
'$
Un-locks the Scroller
Information display:
Display
Meaning
Chosen address is already used by the scroller
")
Colour address is outside the available DMX-sector
")
Motor address is outside the available DMX-sector
")
Fan address is outside the available DMX-sector
")%
Remote address is outside the available DMX-sector
LED-display:
LED-Display
Meaning
green
Valid DMX signal is on
red
Scroller is running in auto-mode
yellow
Problem, but the scroller is still working
Alternating red/green
Error, Scroller does not work any longer
Press
-
for abortion
LED’s in the display:
Display
Meaning
Small dot
Display is switched off, DMX is on
Small dot, flashing
Display is switched off, no DMX
Dot is running from left to right
Fullcolour mode
Dot sequence (1-2) is running from left to right
Halfcolour mode
