background image

R a i n b o w   C o l o u r   C h a n g e r s   G m b H

An der Talle 26-28

D-33102 Paderborn

 Tel: +49 5251 14092 28

Fax: +49 5251 14092 90

E-mail: info@rainbow-colour-changers.de

Homepage: www.rainbow-colour-changers.de

15

8-Lite PRO Colour Changer

The 8-Lite PRO Colour Changer for 8-Lite Blinders corresponds with the other PRO Colour Changers in terms of operation, configuration and
nearly all other functions. (Please find all details in our Operator´s manual.) You will find the only difference in tensioning the colour string
– see page 6.
The Scroller has a square aperture for 8-Lite Blinders. It can be mounted to Major 8-Lite Blinders without further accessories, while different
adaptor versions  for other types of 8-Lite  Blinders are available.
The unit is delivered with safety cable for the front; but without data cable, power supply and colour string.

Technical data

Universal adaptor sizes: 

388 x 680 mm

Maximum number of colours:

25

Start-to-end string movement:

7 s

Front aperture Ø:

680 x 395 mm

Rear aperture Ø:

680 x 395 mm

Power/data Connector style:

XLR4

Weight:  8,5 

kg

Measurements:

519 x 830 x 98 mm

Supply voltage:

24 V (PSU)

Art.No.                       Description

RCC4100

Colour Changer 8-Lite PRO

060992

Colour String, 25 colours  for 8-Lite PRO

060986

Colour String, 16 colours  for 8-Lite PRO

060983

Colour String, 11 colours  for 8-Lite PRO

Maxi PSU

The Maxi PSU is power supply amd DMX splitter for  24 “small” Colour Changers (6”, 8” and 12” PRO) or 12 “big” units (15” and 8-Lite PRO).
The unit is delivered with M10 bold and mains cable with mounted Schuko plug; data cable is not included.

Technical data

Supply voltage:

 

230 V (E); 110 V (U)

Amount of scrollers per PSU:

12/24

Mains connector:

CEE 22

Output connectors:

4 x XLR4

Weight:

3,5 kg

Measurements:

293 x 82 x 250 mm

Art.No.                       Description

RCC125E

Maxi PSU, 230 V

RCC125U

Maxi PSU, 110 V

270410

Halfcoupler 2” Lightweight

270704

Safety cable 2 mm, 60 cm 

Micro PSU

The Micro PSU is power supply and DMX splitter for  6 “small” Colour Changers (6”, 8” and 12” PRO) or 3 “big” units (15” and 8-Lite PRO).
The unit is delivered with M10 bold and mains cable with mounted Schuko plug; data cable is not included.

Technical data

Supply voltage:

 

85-260 V

Amount of scrollers per PSU:

3/6

Mains connector:

CEE 22

Output connector:

1 x XLR4

Weight:

1,4 kg

Measurements:

178 x 72 x 136 mm

Art.No.                       Description

RCC141

Micro PSU

270410

Halfcoupler 2” Lightweight

270704

Safety cable  2 mm, 60 cm 

Summary of Contents for 12" PRO

















Reviews: