THE TRUSTED NAME IN POOL MANAGEMENT
Pool water must be sanitised to remain safe. Chlorine is used for this purpose, but for it to be
effective the pH and other factors must be optimally set. For decades these chemicals have
been dosed by hand (and some pool owners still do) with the result being unmatched chlorine
and pH levels. This hit and miss method resulted in the use of far more chlorine and acid
than was necessary and offered variable sanitation quality for the pool. Then Chemigem was
invented – a device which measured the pH and a new concept called ORP – or Oxidation
Reduction Potential. The Chemigem controller measures these water quality parameters and
makes a decision about whether to add chemical or not – and it makes these decisions about
30 times each hour. Gone is the hit-and-miss of hand dosing, gone is the variability of water
sanitation – the era of automated water quality control has arrived.
TAKE THE GUESS WORK OUT OF ADDING CHEMICALS
The Chemigem measures pH and ORP to keep your pool water healthy. pH is a measure
of the acidity of the pool water, while ORP is a measure of the effectiveness of the chlorine
in the water. Even though two pools may have the same measured chlorine residual, the
pool with the correctly set pH is the one safe for your children to swim in. With Chemigem
the effectiveness of the chlorine is no longer a guess – it is a measured pool
water quality
parameter that you the user are able to set.
LIKE AN INDUSTURIAL PROCESS CONTROLLER FOR YOUR POOL
Chemigem uses an advanced FLASH-based processor with proprietary algorithms to watch
over your pool and filtration system functions. There is a versatile control system for operating
and programming. The LCD display shows you the condition of your pool water and what
Chemigem is doing about it. The display is also used to provide information about the timer. If
the unit is turned on for a quick swim and the user forgets to turn it off afterward it will simply
turn off at the next programmed off time. There is even a provision for running the unit for a
set period from 1 to 48 hours – great for a quick swim, filtration boost or superchlorination.
The unit will even allow an external timer to take control if a home/pool automation system is
already installed.
THE VERSATILITY OF DIFFERENT MODELS OFFERING ALTERNATIVE
CHEMICAL DELIVERY SYTEMS
Chemigem has two main versions – the DM52 for domestic pools and the CM55 for large
commercial pools. Each of these versions can control various ways of feeding chemicals into
the pool water flow: vacuum valves (with/without venturi injectors), peristaltic pumps (12V and
240V) and even solenoids for erosion feeders.
Chemigem also come in models that can control Salt Water Chlorinators for pool owners that
like that method of sanitation.
RAINBOW
POOL
PRODUCTS
PTY
LTD
