Rainbow Pool Products CHEMIGEM DM52 Manual Download

Page: 6 / 33

Key features:

• A computerised on-screen HELP menu
• An automatic pool pump timer
• An easy-to-read screen showing chemical settings and actual chemical readings
• Indicator light and audible alarm that monitor whether pool water chemical levels are within

the required range

Multi-Electrode (probe)

The one Multi-Electrode (probe) is fitted into the side arm of the tapping band that is then

clamped around the PVC pipe running from the pool to the pool pump. The one multi-

electrode (probe) monitors both the Chlorine and pH levels. It is mounted into the tapping

band on the inlet (suction) side of the pool pump. Chemical readings obtained by the multi-

electrode (probe) are monitored by the Chemigem, resulting in Chlorine and/or pool Acid

being dosed into the pool water as and when required via the solenoid valves and tapping

band injector nozzle.

Tapping Band

The tapping band is inserted into the PVC pipe on the inlet (suction) side of the pool pump.

The purpose of the tapping band is to house the Multi-Electrode (probe) and to provide an

injector nozzle for chemicals being dosed into the pool water via the solenoid valves.

Solenoid Valves

The solenoid valves contain the only two moving parts in the Chemigem package. The

purpose of the solenoid valves is to control the flow of Chlorine and/or pool Acid from the

chemical drums as and when required and to inject the chemical(s) into the pool water via an

injector nozzle on the tapping band.

Coil of Plastic Tubing

The plastic tubing is connected from the solenoid valves to the chemical drums and the

tapping band.

Filters

There are two types of filter:

• In-Line Filter
• Drum Filter

The In-Line Filters are connected to the plastic tubing for both the Chlorine and pool Acid tube

lines, between the respective chemical drums and the solenoid valves. The Drum Filters are

connected to the plastic tubing. One is placed in the Chlorine drum and the other is placed in

the pool Acid drum.

Sinkers

The Sinkers are fitted above the Drum Filters. The purpose of the sinkers is to provide added

weight to the Drum Filters so that the filters do not float and remain positioned close to the

bottom of the chemical drums.

RAINBOW

POOL

PRODUCTS

PTY

LTD

Summary of Contents for CHEMIGEM DM52


































Search results

Summary of Contents for CHEMIGEM DM52

Reviews:

Related manuals for CHEMIGEM DM52

Brands by name

Popular brands

Rainbow Pool Products CHEMIGEM DM52, Manual

Search results

Summary of Contents for CHEMIGEM DM52

Reviews:

Related manuals for CHEMIGEM DM52

Brands by name

Popular brands