RainDrop Sense Operator’s Manual
LCN 50-04344 Rev. D
5-9
Figure 5-8: Inserting a Sense Chip
12.
Locate the Chip Compression Plate; for more information on the plate, see
“RainDrop Sense Chip Compression Plate” on page 2-7.
13.
Place the Chip Compression Plate over the Sense chip as shown in
When the plate is properly positioned, its RainDance logo should be facing you, the
plate should be flat, and it should not be movable left to right or front to back.
Figure 5-9: Placing the Chip Compression Plate
After you insert the Chip Compression Plate, you are done setting up the physical
components.
14.
Close the door on the Sense instrument.
