RainDrop Sense Operator’s Manual
LCN 50-04344 Rev. D
5-12
Completing the Run Data Tab
The
Run Data
tab opens after you click
Start Run
on the startup screen and contains the
details about the contents of the run. You can enter this information manually or you can
import it from a file you saved on the Source instrument.
Figure 5-11: Run Data Tab
Only the following fields on the
Run Data
tab are required for the run to proceed:
Run Name
Sense Chip barcode lot and serial number
At least one selected lane (indicated by a green check mark)
Your lab procedures determine how much of the optional information is necessary for your
specific situation.
In addition, before you can proceed with the run, you must have clicked the
Insert PCR Tube
button to indicate that you have inserted the closed tube strip into the instrument.
