RainDrop Sense Operator’s Manual
LCN 50-04344 Rev. D
5-18
Performing the Run
After you have entered the required run data, you are ready to begin the run.
1.
Click the
Start Run
button. The screen displays information about the Sense run in
progress as shown in the following image.
Figure 5-13: Sense Run Screen
The center of the screen displays information about which sample is being processed.
The right side of the screen displays information about the progress of the run.
2.
When the sample is done, the door unlocks automatically.
3.
Lift the door to its full open position.
4.
To minimize the potential for contaminating the lab environment with the amplicon,
return the used chip to the bag it came in and discard it in a solid waste disposal
container.
