RainDrop Sense Operator’s Manual
LCN 50-04344 Rev. D
3-4
To plug cables into the back of the Sense instrument:
1.
Plug one end of the AC Power Cable into the Power Cable Connection and the other
end into a standard grounded wall outlet.
Important:
The Detachable Main AC Power Cable for North America or other
countries with 120 VAC 50/60 Hz supply voltage provided for the RainDrop Sense
instrument is a 3-wire cord, 18 AWG, 10 A, 125 VAC. Never substitute a Detachable
Main AC Power Cable with a lower current or voltage rating.
2.
Plug the two USB Cables into the USB Connections on the Sense instrument as
shown in
.
Connecting Cables to the Instrument Controller
The RainDrop IC Workstation has USB connections used for:
The mouse
The keyboard
The RainDrop Sense instrument
Both the Source and Sense instruments connect to their IC Workstations via USB
connections.
illustrates the USB cable connections on the IC Workstation.
Note:
It is important that all the USB cables on the instruments are connected to USB ports
on the workstations. Failure to connect the USB cable correctly can result in a loss of
communication with the RainDrop instrument. In addition, the USB connections on your
workstation may differ from those shown in
