RainDrop Sense Operator’s Manual
LCN 50-04344 Rev. D
4-11
Using Tabs in the ICS
There are two tabs in the ICS that appear after you click Setup a Run: Run Data and Run
Info. To perform a run, you will need to complete some of the fields on each tab.
To ensure that all of the steps are completed correctly, RainDrop provides a System Status on
the right side of the tabs to indicate the state of each of the required items. As you complete
each step in the process the status icon for that step is updated. This section provides
general information on what appears on the tabs and how to complete these processes.
Details on how to complete each of these processes is provided in
. Those
descriptions assume you are familiar with how to use the tabs described here.
shows an example of the Sense interface. The tabs required to complete the
process are shown on the left side of the screen:
Run Data
Run Info
Figure 4-8: Sense Tabs
Only one tab is visible at a time. The selected (or active) tab has a white background and the
inactive tab has a transparent background (Run Data is the active tab in
