1
4
)
Applications and Operation:
The PC115A electronic controller commands the starting and stopping of single-
phase electric water pumps whenever a tap or valve connected to the installation is
opened or closed, respectively. When the pump is started, it keeps running as long
as any connected tap remains open, supplying the network with the required flow
at the related pressure
.
•
Inlet connection : 1”
•
Outlet connection : 1”
•
Non-water hammer check valve.
•
Dry-running protection system.
•
Pressure gauge.
•
Manual start button (RESET).
•
AUTORESET function for automatic start after a failure.
•
Power supply LED (POWER).
•
Pump switch-on LED (ON).
•
Safety system activation LED (FAILURE).
•
Power supply voltage: 1~115-125V
•
Maximum current : 16 A
•
Max pump power : 1100W(1.25 HP) at 1-115-125V
•
Frequency : 50/60 Hz
•
Protection class : IP 65 (*)
•
Ambient temperature : 0 /+140° F
•
Liquid temperature : 0 /+140° F
•
Max flow rate : 44 GPM
•
Adjustable starting pressure : 20 - 35 PSI
•
Max operating pressure : 145 PSI
(*)Provided the cable glands and screws in cover have been suitably tightened
1
7
)
Handling and Inspection:
Handle with care. Dropping and impact can damage the product.
Before proceeding with installation, make sure the unit shows no visible signs of
damage, otherwise contact your dealer.
1
5
)
Construction Characteristics:
1
6
)
Specifications:
Summary of Contents for MHP150A
Page 12: ... MHP75A MHP150A Pump ...
