3
4. PHYSICAL CHARACTERISTICS
•
Inlet connection: 1” (1
¼” for MHP150)
•
Outlet connection: 1”
Motor
•
2-pole induction motor
•
Single-phase: 110-125VAC/60Hz
•
Input thermal protector
•
Insulation class: F
•
Protection: IP55
5. OPERATING CONDITIONS
•
Liquid temperature: 0°C-60°C (32°F-140°F)
•
Maximum environmental temperature: 50°C (122°F)
•
Maximum operating pressure: 10 bar (145 PSI)
•
Maximum suction pressure is limited by maximum operating
pressure
Under no circumstances should the pump be exposed to freez
-
ing temperatures with water in the pump.
6. INSTALLATION
Handle with care. Dropping and impact can damage the product.
Before proceeding with installation, make sure the unit shows no visible
signs of damage.
Mounting Location
The pump must be mounted in a horizontal orientation and must be
mounted externally on the ground or other sturdy platform. When mount
-
ed externally, the pump must be safely and securely mounted in a man
-
ner which prevents exposure to electrical connections and in a location
which prevents damage and exposure to freezing temperatures.
Environmental Considerations
If the pump may be exposed to freezing temperatures, the pump must be
fully drained and protected with food-grade antifreeze. The pump offers
water resistance but should be mounted in a location away from direct
exposure to rain, humidity, snow, excessive heat and direct sunlight.
