1 4 |
P a g e
RF4 Controllers
RF4
Series
RF4-C
Series
Simplistic in operation, these systems feature a tri-colour
LED that indicating system status and a 4-digit display to in-
dicate lamp life remaining. Pressing the button will change
the display to indicate total running time. When the UV lamp
is on and within its operating age, the LED will be green.
When the UV lamp is not on or the lamp life has expired,
the LED will be illuminated red and an audible buzzer will be
sounding. To remedy this condition, the UV lamp must be
replaced with a new genuine RainHarvest Systems UV lamp.
RF5 & RF6 Controllers
RF5 / RF6
Series
RF5-C / RF6-C
Series
A full colour LCD screen provides the user with a detailed
description of the system’s performance in addition to pro-
viding any applicable fault messages and system diagnostics.
The controllers used in both the RF5 and RF6
are identical.
The difference is that the RF6 series of products includes a
UV intensity monitor. All RF5 and RF6 controllers include an
“infinite expandability port” located on the right side of the
controller. Simply plug in an optional UV sensor module into
the expandability port of a RF5 controller and the system
will now monitor the UV intensity of the system!
RF5 & RF6
Power-up Sequence
On start up, the controller will run through a diagnostic start-up and the sequence will be
displayed as follows on the colour LCD:
Next, the controller checks for and initializes any optional modules that may be attached to the
system.
Optional Modules Check
- UV Sensor
- Solenoid
- 4-20 mA
- WIFI
- Remote Alarm
- Flow Meter
OR
Summary of Contents for RF4 Series
Page 26: ...2 6 P a g e...
Page 27: ...2 7 P a g e...
