EAGLE-200
™
User Manual
16
EAGLE-200 Status LED Lights
The EAGLE-200 has five LED lights at the front of the top of the device. These lights
are a quick way to check the status of the device.
Power LED
– shows that the device is powered on. The light should always be
on when the unit is plugged in.
Ethernet LED
– shows status of the connection to the local Ethernet network.
Off
No Ethernet connection. May not be plugged in. This light will be off
when WiFi is being used.
Blinking Ethernet link is active, but waiting for an IP address from the router.
On
EAGLE-200 is connected to your network.
WiFi LED
– shows status of the WiFi radio.
Off
WiFi radio is off.
Slow Blink
WiFi radio is in AP/Router Mode.
Fast Blink
WiFi radio is joining to your network.
5 Blinks, Pause
There is a WiFi error.
On
WiFi radio is connected to your router in Client Mode.
Cloud LED
– shows status of connections to the cloud
Blinking
Problem detected with the cloud connection.
On
No cloud problems detected.
Zigbee LED
– shows that the Zigbee radio is active. It should come on shortly
after the EAGLE-200 boots up.