9
(III)
ADVANCED PROGRAMMING
In the advanced programming, you can change individual regeneration cycle times. DO NOT change these without confirming
with Rainfresh technical support. By changing these values your unit can malfunction.
15.
Press
SETTINGS
again to
advance to “GALLONS”.
Leave at default setting.
GALLONS
OFF
REGEN. TIME
02:00 AM
16. Press
SETTINGS
to advance
to “REGEN TIME”. This is
the time when the unit will
complete regeneration.
Leave at default setting or
use
UP
or
DOWN
keys to
change per your choice
LOAD DEFAULT
NO
17. Press
SETTINGS
again to
advance to “LOAD
DEFAULT”. Do not change
this setting unless you
want to change all your
settings to factory settings
PROGRAMMING
COMPLETE
18. Press
SETTINGS
again and
this completes the
programming
Unlock display by pressing
SETTINGS for 3 sec. Press
UP
&
DOWN
keys together for 3
seconds until unit beeps and
display changes to VALVE
MODE.
VALVE MODE
CHEMFREE-AIR
AIR-DRAW
45
MINUTES
Press
REGEN
button to
advance to “AIR-DRAW”
Leave at default setting. You
can use
UP
arrow key to
increase this setting to max 70
min. DO NOT REDUCE value
AIR-DRAW
45
MINUTES
Press
REGEN
to advance to
“LOCK VALUE”
LOCK VALUE
UNLOCK
Leave VALVE MODE at default
setting. Press
REGEN
button
to advance to “SYSTEM SIZE”.
VALVE MODE
CHEMFREE-AIR
Default BACKWASH is set for
15 min. Press
UP
to increase
this setting if your water has
high turbidity
BACKWASH
15
MINUTES
