9
Level 2 PROGRAMMING (OPTIONAL SETTINGS)
NOTE :
Under normal use there is no need to change the settings under level 2 programming. You can, however,
change the default settings if required.
CAUTION: DO NOT CHANGE LEVEL 2 SETTINGS WITHOUT CONSULTING
RAINFRESH TECHNICIAN (1-800-667 8072). Wrongly changing the settings can result in malfunction of the unit.
When the Level 2 Master Programming Mode is entered, all available option setting displays may be viewed and set
as needed. Depending on current option settings, some parameters cannot be viewed or set.
To change any setting under level 2 programming
-
press the “
” key and the value flashes
-
press the “ or ” keys to change the value
-
press the “
” key again to accept value
-
press the “ ” key to advance to the next value
The following chart indicates choices and default settings.
Note:
Default settings are indicated in
bold letters
Use same programming method as you used in level 1 to advance and/or change values.
Bold letters indicate default settings
Parameter
DEFAULT Option
1
Option
2
Option 3
Comments
System Language
English
Spanish
French
Set to French if desired. Spanish not enabled
Valve Operation
Filter
Softener Iron
Filter
Leave at default setting
Backwash Mode
Calendar
Clock
Meter
Delayed
Meter
Overrid
e
Meter
Immediat
e
CBF1 filter should backwash at least once
every week to ensure proper operation
Backwash Time
2:00 AM
The unit is factory set to regenerate at 2:00
AM on the day of backwash. You can change
to another time if desired.
Backwash Days
Set for – 03 days
Backwash
10
Rapid Rinse
10
Restore Default
NO
Leave at default. Change only if you would
like to re-start programming from the
beginning
2.
Press “ ” (MENU) for 3
seconds to unlock screen.
JAN/21/2015
JAN/21/2015
JAN/21/2015
JAN/21/2015
05:27 PM
05:27 PM
05:27 PM
05:27 PM
4.
The display will read “
Press
MENU Key for 3 sec to unlock”
.
5.
After 3 seconds, the display will
beep confirming unlock
PRESS MENU KEY
PRESS MENU KEY
PRESS MENU KEY
PRESS MENU KEY
3 SEC TO UNLOCK
3 SEC TO UNLOCK
3 SEC TO UNLOCK
3 SEC TO UNLOCK
SYSTEM LANGUAGE
SYSTEM LANGUAGE
SYSTEM LANGUAGE
SYSTEM LANGUAGE
ENGLISH
ENGLISH
ENGLISH
ENGLISH
4. Press and hold “
”
together
for three seconds
to enter Level Two Master
Programming.
