Appendix 2 - Installation Instructions
– Page 12
Stage 2 - Brine outlet (waste overboard)
2 x
3/4”
hose barbs
1 x
3/4”
BSP tee female
1 x
3/4”
-
1/4”
bush
1 x
1/4”
- 10mm push-fit
4 x Hose clamps
The brine waste water hose will come from the RO unit in the traditional blue cased version of the system. If
you have a Rainman Naked system, the green brine hose will come from the remote pressure control valve /
gauge assembly.
Run the green brine hose from the RO unit to an above water through hull fitting, cable tying along the way
to secure. Parts are supplied so you can easily connect to an existing
3/4”
hose connected to an above water
through hull fitting. Tee into the existing
3/4”
hose with the tee supplied and plug the green brine hose into
the brine push-fit (Port D).
If you have a spare above water through hull fitting, you may need to source parts to connect to the
1/4”
-
10mm push-fit.
