Problem
Possible Factors
Solution may help
Hub can’t
connect
Timer can't
connect
•
Not using 2.4GHz
WIFI.
•
Incorrect WIFI
password.
•
Distance between
sensor and hub is too
far.
•
Impurities in water
inlet filter.
•
Rainfall delay
parameters are set.
•
In a low power state,
the timer goes into a
low power protection
state and does not
execute the schedule.
Irrigation duration/
period is not set with
parameters.
•
Confirm 2.4GHz WIFI
connection.
•
Confirm that the WIFI
password has been entered
correctly.
•
Stay closer to the hub while
connecting.
•
Inlet impurities need to be
cleared regularly so that
they do not clog up and
interfere with the irrigation
program.
•
Check that the rainfall delay
parameter is set.
•
Replace fresh batteries.
Check that the irrigation
duration/period is not set
with parameters. (Note
12H/24H).
If you need more help about the product or anything from us, please
contact us by
US: 1-833-381-5659 (EN)(MON-FRI 9�30 AM-5�30 PM PST)
EU: +44 800-808-5337 (EN DE)(MON-FRI 9�00 AM-5�00 PM CET)
Email: service@rainpointus.com
- 17 -