‘Rainy’ Filter can be fixed to the wall by connecting to the hollow pipe
which is drawn from the roof into the Filter Inlet. The Rainwater along
with dirt & debris flows by Gravity through the hollow pipeline, enters
into the filter, starts rotating in anti-clockwise direction at the periphery
of the upper housing so as to flow into the SS-304 filter element placed
in the lower housing in angular motion at specific speed & velocity which
creates Cohesive force at low intensity & Centrifugal force at high
intensity of rainfall. In both situations, involving low & high intensity of
rainfall, the working principle of the filter based on cohesive &
centrifugal force respectively, aids the filter element to flush out
automatically the dirt & debris through the drain outlet and
simultaneously divert clean water into the sump/recharging well
through the clean water outlet, which can be used for reutilization or
recharging of groundwater source.
Special Features
•
Since the filter assembly is an open drain system, it does not allow
for the stagnation of water and solid particles, eliminating the need
for periodic maintenance.
•
The filter has self-cleaning capabilities enabled by its unique
working principles, with efficiency of over 90%.
•
No external source of energy is required, because the filters are
designed to operate by Gravitational force.
•
Rainy filters are extremely versatile such that they can be
accommodated anywhere, from being wall mounted on low lying
roofs to underground ducts.
•
Tough UV stabilized high density polyethylene housing.
•
Filter Element SS-304 is multi-surface screen.
•
All the material used are food grade and recyclable.
•
Filter pipe connections can be turned up to 360 degrees allowing it to
suit the given site conditions
Summary of Contents for FL-150
Page 1: ...FL 150...
Page 24: ...Wash it clean it well and re insert the same Clean it up with a brush...
Page 28: ...Rainy FL 150 S N...
