16
ASSEMBLY
Place the left cross log next. Use the raised platform
at the left rear corner of the burner top to support the
end of the cross log. The split charred end of the log
faces toward the front. Place the pin socket over the
front alignment pin hole in the arch log. You may
have to wiggle the arch log and right cross log to get
the pin socket to drop over the alignment pin. See
the adjacent illustration.
When correctly placed, the logs and ember chunk will look like the illustration below.
Finally, place the ember chunk with the non-
charred end in the corresponding recess in the
burner top per the adjacent illustration. It has a
specific position and orientation and will not rock
when in the proper position.
