ENGLISH RAIS - manual for GEO
11
1. Place the stove where you want to install it (it cannot be moved after the soapstone is
installed).
a) Rear exit can be installed when the third row of soapstone is installed - only GEO
161.
The distance at the top between the sides of the stove is 250 mm, and fits the RAIS
flue pipe, which is 150 mm and 90° tee with or without cleaning door.
b) For top exit:
Remove the marked opening with a plastic or rubber hammer.
Installation up at the ceiling:
When using this type of installation, the easiest approach is to use the RAIS sliding
flue system and a 570 mm adapter. The steel top plate should be pushed on the flue.
2. Adjust the legs so they are level.
- Loosen the counter screw
- Adjust the leg
- Tighten the counter screw
3. Place the soapstone as shown on the diagram and screw them together with the
enclosed mountings.
Depending on the choise of flue exit, you are left with either one piece of soapstone
no. 7023 or 7033/7036.
4. Insert the firebox.
a) Ensure that the firebox is centred within the stove (it must not touch the soapstone)
b) If you are using the rear exit, ensure that the exit holes are aligned. If you are using
the top exit, this alignment issue is irrelevant.
Summary of Contents for GEO
