21
Contact local Building or Fire offi cials about restrictions and installation inspection in
your area.
Install and use only in accordance with manufacture's installation and operating
instructions and local codes. In absence of any local codes, installation must meet
minimum requirements of NFPA 221 in USA.
Refer to manufacture's instruction and local codes for precautions required for passing
chimney through a combustible wall or ceiling. Inspect and clean chimney system
frequently in accordance with manufacture's instruction.
Do not connect this stove to a chimney fl ue serving another appliance.
Do not use grate or elevate fi re. Build wood fi re directly on hearth.
Flue connector pipe must be 6 inch diameter, minimum single wall 24 msg black or 25
msg blued steel.
Chimeney must be factory built 6" diameter Class "A" 103HT, or masonry.
TO PREVENT CREOSOTE FIRES
Inspect and clean chimney frequently - Under certain conditions of use, creosote
buildup may occur rapidly.
Do not use other fuels than Fire wood.
CAUTION: Fully open combustion air control before opening the fuel feed door.
CAUTION: Only operate the wood heater with the doors closed.
TO PREVENT HOUSE FIRES
CAUTION:
HOT WHILE IN OPERATION - DO NOT TOUCH. KEEP CHILDREN
AND CLOTHING AWAY - CONTACT MAY CAUSE SKIN BURNS.
SEE NAMEPLATE AND INSTRUCTIONS. KEEP FURNISHINGS AND
OTHER COMBUSTIBLE MATERIALS A CONSIDERABLE DISTANCE
AWAY FROM THE APPLIANCE.
DO NOT REMOVE THIS LABEL
Do not overfi re - if heater or chimney connector glows, you are overfi ring.
US
TECHNICAL INFORMATION
TECHNICAL INFORMATION