USER MANUAL --Raiscube A8R 3D Printer
4
Precautions
Warning: The printer can only be used with original power supply, or the product may be damaged, with a risk of
fire.
Warning: The RAISCUBE A8R generates high temperatures. To avoid burning, or model deformation, do not
touch the model, nozzle, or the platform by hand, or any other part of the body, while the printer is working or
immediately after it has finished printing.
Warning: There is a slight smell from ABS when it is being extruded. The smell is, however, not too unpleasant.
Operate in a well ventilated room but draught free. Draught can affect warping of ABS prints. When ABS is burnt
is releases toxic fumes.
Warning: Do not use ABS plastic or its printed parts near any kind of heat source, flames, fireworks, candles,
light bulbs, etc. ABS will catch fire and burn a thick black smoke.
Warning: Always have adult supervision when children are present. Please keep all small printed parts away
from young children, choking hazards! There are several safety issues, small tools, sharp tools and HOT
objects and most parts used in connection with the 3D Printer. Tie back long hair and loose clothing. Keep
fingers away from moving parts.
Warning: Tools and parts should be stored at a suitable height away from small children.
Caution: The socket outlet must be located near the equipment and must be easily accessible.
Caution: In case of emergency disconnect the RAISCUBE A8R from the wall socket.
Caution: The RAISCUBE A8R melts plastic during printing. Plastic odors are emitted during this operation.
Make sure to set up the RAISCUBE A8R in a well-ventilated area.
Warning: Do not leave the RAISCUBE A8R unattended during operation.
