RAISCUBE R10 3D PRINTER MANUAL
12
1
Select “
Control
” → “
Temperature
” → “
Bed
”.
Turn the bed temperature to 55°C. Then navigate back to the Info Screen. This will heat the
bed to actual printing conditions, making the leveling more accurate.
2
Select “
Prepare
” → “
Preheat PLA
”.
This will heat the nozzle and melt any hardened plastic that might be on the nozzle and
affect the leveling process.
3
Select “
Prepare
” → “
Auto home
”.
This will move the nozzle to the home position at the front left corner of the build plate.
4
Select “
Prepare
” → “
Disable steppers
”.
This will allow you to move the nozzle assembly (X axis) and build plate (Y axis) by hand.
Pro Tip:
The Z axis stepper is also disabled, and you don’t want it to move at all.
So you should handle the printer gently during the leveling process. Keep it flat and move the
nozzle assembly carefully.
5
Wait for the print bed temperature to reach 55°C and the nozzle temperature to reach
200°C. The Info screen displays this information below the nozzle and bed icons.
6
Slide a piece of paper between the nozzle and the build plate.
7
Adjust each of the four thumbscrews under the bed until the piece of paper sides, with just
a tiny bit of drag, in all locations on the build plate
8
Select “
Prepare
” → “
Auto home
”, then
Prepare
” → “
Disable steppers
”, and recheck in
several places. This is to make sure the Z-axis lead screw didn’t rotate during the leveling
process.
9
During printing, there will be three selections coming out: “
Pause print
”, ”
Stop print
”,
”
Resume print
”.
Select “
Pause print
”, this will be stop printing
temporarily
, when need to feed/change
another filament in the halfway of print process. After finishing feeding/changing,
select ”
Resume print
”, this will continue to print unfinished process.
Select “
Stop print
”, this will abandon the current print task. This will start another print
process.
Pro Tip:
Can be turn the temperature of hotbed into 0°C for hotbed protection when
making a long-time print model in the halfway of process.
Summary of Contents for R10
Page 1: ...RAISCUBE R10 3D PRINTER MANUAL 1 RAISCUBE R10 USER MANUAL ...
Page 8: ...RAISCUBE R10 3D PRINTER MANUAL 8 Fig 06 Also please refer to Fig 07 when connecting ...
Page 9: ...RAISCUBE R10 3D PRINTER MANUAL 9 Fig 07 Overall Details ...
Page 11: ...RAISCUBE R10 3D PRINTER MANUAL 11 2 User Manual Screen Information ...