RAISCUBE R10 3D PRINTER MANUAL
21
4. Troubleshooting
This section covers the most common printing problems and how to fix them. Because 3D printing is
still an emerging technology, a small level of tinkering and troubleshooting is needed. But if this
section doesn’t solve your printing problems, then contact our admin on FB Group. We’re here to
help you every step of the way to get you 3D printing!
1. Step-by-Step Troubleshooting
Step 1: Diagnose the problem.
This may seem obvious, but many problems can be solved if you take a step back and see exactly
what the printer is doing incorrectly.
Step 2: Determine if the problem is mechanical or digital.
1
Mechanical problems are in the actual operation of the printer, such as the motors that drive
the X, Y, and Z axes, the motor that pushes the filament, the nozzle heater, and the level of the build
plate. The most common mechanical problems are caused by a build plate that is not adjusted
correctly, a clogged nozzle, or an unplugged connector on a motor or limit switch.
2
Digital problems are in the slice file that you prepare in Cura or other slicing program.
Important slice file settings include layer height, print (nozzle) temperature, and print speed.
Step 3: Fix the problem.
Once you’ve discovered what the actual problem is, you can fix it with the following procedures. (If
none of these fix the problem,
contact us
.)
2. Digital problems: Slicer settings
1
Check your slice file in Cura. Make sure the print is centered in the build area, making good
contact with the build surface, and isn’t too big for the build envelope.
2
Check the slice settings. Make sure that the layer height is between 0.1mm (high quality
prints) and 0.3mm (low quality prints).
3
Check the speed and temperature. For PLA, they should be set to 30–50mm/s and 230°C.
4
Make sure the filament diameter is 1.75mm and the flow rate is 100%.
5
Check the Fill Density (infill) and make sure it is at least 5%. You may need to adjust this
value to your liking for your model.
Summary of Contents for R10
Page 1: ...RAISCUBE R10 3D PRINTER MANUAL 1 RAISCUBE R10 USER MANUAL ...
Page 8: ...RAISCUBE R10 3D PRINTER MANUAL 8 Fig 06 Also please refer to Fig 07 when connecting ...
Page 9: ...RAISCUBE R10 3D PRINTER MANUAL 9 Fig 07 Overall Details ...
Page 11: ...RAISCUBE R10 3D PRINTER MANUAL 11 2 User Manual Screen Information ...