RAISCUBE FDM 3D Printer
After Configuration of Parameters, remember to save files to SD Card. Pleaes note to name file in English, or will
fail to printing.
Speed: Speed at which the
filament is retracted, a higher
retraction speed works better.
But a very high retraction
speed can lead to filament
grinding. 120 is a common
value for it.
Retraction: Retract the filament when the
nozzle is moving over a none-printed area.
Details about the retraction can be configured
in the advanced tab.
Distance: Amount of
retraction, set at 0 for no
retraction at all. A value of
4.5mm seems to generate
good results. Normally set
to be 3~5mm.
Cut off object bottom: Sinks the
object into the platform, this can
be used for objects that do not
have a flat bottom and thus create
a too small first layer. Also can be
used to printing
Scale: Middle icon is
scale to adjust model
size for printing.
Model is locked by default to keep the
whole object a same zoom rate, click on
the lock icon to zoom XYZ separately.
Summary of Contents for R2
Page 3: ...RAISCUBE FDM 3D Printer ...
Page 4: ...RAISCUBE FDM 3D Printer ...
Page 5: ...RAISCUBE FDM 3D Printer ...