WWW.RAISE3D.COM
AMERICA · ASIA · EUROPE
Pro2 Hotend Installation Instruction
STEP 11: Extruder Positioning
•
Disable the motor with the ‘Disable Motor’ button. This will allow you to freely reposition the
extruder by hand.
⚫
Move the extruder head along the rods into the center position.
When physically moving the extruder, avoid touching high-temperature components. Perform
all motions via the upper section of the extruder head.
STEP 12: Left Nozzle Calibration
Select the Left Nozzle Icon, and press the down arrow to ensure the left nozzle is enabled.